Emspira 3 Digital Microscope from Leica Microsystems

Product Specs
ItemEmspira 3 Digital Microscope
CompanyLeica Microsystems
Price Get Pricing Get Quote for this Product
Catalog NumberEmspira 3
QuantityEA
ApplicationsQuality control, industrial inspection, materials analysis, documentation
TypeDigital Microscope

Add to Compare List

Leica Microsystems

10 Parkway North Blvd., Suite 300

Deerfield, Illinois 60015

United States

Phone: 800 248 0123

Company Profile

Website: www.leica-microsystems.com

(1) Early humans and the balance of power: Homo habilis as preyAnnals of the New York Academy of SciencesNovember 1, 2025Marina Vegara‐Riquelme, Enrique Baquedano, Manuel Domínguez‐Rodrigo16×, 20×, 25×, 32×/30×, 40×, 50×, and 60×). The tooth mark image database was compiled using a Leica Emspira 3 digital microscope. However, a portion of the tooth mark sample included in the database was documented using different

(2) The Localization of Cell Wall Components in the Whole-Mount Immunolabeled Nepenthes Digestive GlandsInternational Journal of Molecular SciencesSeptember 19, 2025Bartosz J. Płachno, Małgorzata Kapusta, Marcin Feldo, Piotr Stolarczyk, Piotr Świątekaqueous solutions. After several hours, the pitcher was rinsed with water, and photos were taken using Emspira 3 Digital Microscope (Leica, PIK Instruments Sp. z o.o. Piaseczno, Poland). 5. Conclusions The method used was not perfect

(3) Evolution of Pore Volume During Stripping of Lithium Metal in Solid‐State Batteries Observed with Operando DilatometrySmallAugust 1, 2025Thomas A. Schall, Till Fuchs, Janis K. Eckhardt, Tim Klunz, Boris Mogwitz, Joachim Sann, Klaus Peppler, Jürgen JanekSupporting Information), to enable precise detection of the exact area with an optical microscope (Leica EMSPIRA‐3). Relative density, roughness, and ionic conductivity of the used LLZO‐Pellets can be found in Table

(4) Mechanical Characteristics of Glass-Fiber-Reinforced Polyester Composite MaterialsMaterials (Basel)July 31, 2025Ioan Milosan, Tibor Bedo, Camelia Gabor, Mihai Alin PopFor each type of mechanical test, five specimens were prepared from each material variant. A Leica EMSPIRA 3 3D optical microscope (Leica Microsystems Ltd., Heerbrugg, Switzerland) was used to capture both the

(5) Reassessing deep learning (and meta-learning) computer vision as an efficient method to determine taphonomic agency in bone surface modificationsBiology Methods and ProtocolsJuly 12, 2025Manuel Domínguez-Rodrigo, Gabriel Cifuentes-Alcobendas, Marina Vegara-Riquelme, Enrique Baquedanonot bias model performance according to class. This led us to replace this microscope with a Leica Emspira 3 Digital microscope, which is the tool that has provided the bulk of the datasets for our latest studies and provides high-resolution

(6) Influence of the Fill Value Parameters on Acoustic and Physical–Mechanical Performance of 3D-Printed PanelsPolymers (Basel)June 28, 2025Mihai Alin Pop, Mihaela Coșniță, Sebastian-Marian Zaharia, Lucia Antoaneta Chicoș, Cătălin Croitoru, Ionuț Claudiu Roată, Dorin CătanăAnalysis Images of the fractured composite surfaces were taken using an optical microscope, type Leica, Emspira 3 model, Arnhem—Nederland. 3. Results and Discussion 3.1. The Effect of Printing Parameters on the

(7) Investigation of multi-input convolutional neural networks for the prediction of particleboard mechanical propertiesScientific ReportsFebruary 4, 2025Shuoye Chen, Shunsuke Sakai, Miyuki Matsuo-Ueda, Kenji Umemura(TU-213, Yamato Kohki Industrial Co., Ltd., Japan) was used to smooth the surface, and a stereomicroscope (Emspira 3, Leica Microsystems GmbH, Germany) was used to obtain cross-sectional images of the particleboard. The

(8) Imaging the microstructure of lithium and sodium metal in anode-free solid-state batteries using electron backscatter diffractionNature MaterialsDecember 1, 2024Till Fuchs, Till Ortmann, Juri Becker, Catherine G. Haslam, Maya Ziegler, Vipin Kumar Singh, Marcus Rohnke, Boris Mogwitz, Klaus Peppler, Linda F. Nazar, et al.The circular electrodes were sliced with a microtome blade and positioned under a digital microscope (Emspira 3, Leica Microsystems) to match the polished cross-section of the NZSP pellet. Cross-sections for in situ

(9) Improved Protocol for Efficient Agrobacterium-Mediated Transient Gene Expression in Medicago sativa L.Plants (Basel)October 26, 2024Suma Basak, Dipika Parajulee, Seema Dhir, Ankush Sangra, Sarwan K. Dhirglycerol. The transient GUS activity of the alfalfa explants was examined under a Leica microsystems EMSPIRA 3 digital microscopes with a magnification of 1.2× (Life Sciences companies @ Danaher corporation, Washington,

(10) Artificial intelligence for the identification of taphonomic bio-accumulator agents: an actualistic test of potential faunal accumulation agency applied to Tritons Cave (Lleida, Spain)Royal Society Open ScienceOctober 23, 2024Blanca Jiménez-García, Cristian Micó, Marcos Pizarro-Monzo, Gabriel Cifuentes-Alcobendas, Maite Arilla, Jordi Rosell, Florent Rivals, Ruth Blasco, Enrique Baquedano, Manuel Domínguez-Rodrigothere any taphonomically convincing evidence from the past. The image bank was created using a Leica Emspira 3 microscope, which is capable of capturing both two-dimensional and three-dimensional images. The only

(11) Hydrophobic Cellulose-Based Sorbents for Oil/Water Separation †MoleculesSeptember 30, 2024Karolina Tomkowiak, Bartłomiej Mazela, Zuzanna Szubert, Waldemar Perdochareas of the produced cellulose samples were examined using a digital microscope (Leica Microsystems Emspira 3, Wetzlar, Germany) (Figure 1). Images were processed using the LAS X program (Leica Application Suite

(12) A new combination for a neglected member of Linaria subsect. Versicolores (Plantaginaceae, Antirrhineae) endemic to the Algarve, PortugalPhytoKeysJune 19, 2024João Farminhão, André Carapetothe chromosome number for this taxon was retrieved from Viano (1973). Seeds were examined under an Emspira 3 digital microscope (Leica Mycrosystems) and photographed with Application Suite X (LAS X). The key to the Iberian clade

(13) Proof-of-concept for a novel nanotechnology-based treatment for urolithiasisUrolithiasisApril 6, 2024Ian Houlihan, Benjamin Kang, Vijay Krishna, Smita Dethe 785 nm and 1320 nm wavelength sources, respectively. The stones were continuously imaged using an Emspira 3 Leica stereomicroscope. Controls were also performed in which stones were exposed to the NIR energy

(14) Eco-Friendly Cork–Polyurethane Biocomposites for Enhanced Impact Performance: Experimental and Numerical AnalysisPolymers (Basel)March 24, 2024Mateusz Dymek, Mariusz Ptak, Paweł Kaczyński, Fábio A. O. Fernandes, Ricardo J. Alves de Sousa, Gabriel F. Serra, Maria Kurańskaexamination in order to compare the structure of each. The observations were conducted using a Leica Emspira 3 digital microscope (Figure 3). Upon observing the structure of rigid polyurethane foams with the naked eye and under a

(15) Computer vision enables taxon-specific identification of African carnivore tooth marks on boneScientific ReportsMarch 22, 2024Manuel Domínguez-Rodrigo, Marcos Pizarro-Monzo, Gabriel Cifuentes-Alcobendas, Marina Vegara-Riquelme, Blanca Jiménez-García, Enrique Baquedanothe photographed marks. In order to improve image quality, a new image bank was created using a Leica Emspira 3 digital microscope, which is capable of capturing not only bidimensional, but also tridimensional images. This microscope

(16) Thermal and Sound Insulation Properties of Organic Biocomposite MixturesPolymers (Basel)March 1, 2024Mihai Alin Pop, Cătălin Croitoru, Simona Matei, Sebastian-Marian Zaharia, Mihaela Coșniță, Cosmin SpîrchezAnalysis The cross-section of the fractured composite samples was analyzed using a digital optical microscope Emspira 3 (Leica Microsystems GmbH, Wetzlar, Germany) at specified magnifications as indicated on each micrograph. 2.5.

(17) Evaluation of Parameters Affecting Agrobacterium-Mediated Transient Gene Expression in Industrial Hemp (Cannabis sativa L.)Plants (Basel)February 28, 2024Tasnim Mohammad, Rishikesh Ghogare, Lauren B. Morton, Amit Dhingra, Shobha Potlakayala, Sairam Rudrabhatla, Sarwan K. Dhirβ-glucuronidase gene in 3-week-old leaves with a surface area of 99.04 mm2. Pictures were taken using a Leica EMSPIRA/3 Stereo Zoom Microscope (Leica Microsystems Inc., Deerfield, IL, USA) at a magnification of 0.743× (scale

(18) A Methodological Framework for Assessing the Influence of Process Parameters on Strand Stability and Functional Performance in Fused Filament FabricationMaterials (Basel)December 6, 2023Eleni Gkartzou, Artemis Kontiza, Konstantinos Zafeiris, Elena Mantzavinou, Costas A. Charitidisterms of dimensional accuracy and surface morphology. Qualitative inspection of top specimen layer (Emspira 3 Digital Microscope, Leica Microsystems GmbH, Wetzlar, Germany) was conducted to assess surface morphology and deposition

(19) From identification to forecasting: the potential of image recognition and artificial intelligence for aphid pest monitoringFrontiers in Plant ScienceJuly 19, 2023Philipp Batz, Torsten Will, Sebastian Thiel, Tim Mark Ziesche, Christoph Joachimused as a first step to simplify further data analysis (right a-e). Pictures are captured with a Leica Emspira 3 digital microscope.

(20) 3D-Printed PLA Molds for Natural Composites: Mechanical Properties of Green Wax-Based CompositesPolymers (Basel)May 28, 2023Mihai Alin Pop, Mihaela Cosnita, Cătălin Croitoru, Sebastian Marian Zaharia, Simona Matei, Cosmin Spîrchezfractured composite surfaces were taken using an optical microscope type Leica (Arnhem, The Netherlands), Emspira 3 model. 3. Results and Disscusion 3.1. Mechanical Tests The mechanical, thermal, and durability properties

Be the First to Write a Review!