Caspase-3 (D3R6Y) Rabbit mAb (IHC Formulated) 14214S from Cell Signaling Technology

Product Specs
ItemCaspase-3 (D3R6Y) Rabbit mAb (IHC Formulated)
CompanyCell Signaling Technology
Price $357.00 Inquire
Catalog Number14214S
Quantity100 µl
ApplicationsIHC-p
ReactivityH
TargetCasp3
HostRabbit
NCBI Full Gene Namecaspase 3
NCBI Gene AliasesCPP32, CPP32B, SCA-1
ClonalityMonoclonal
Research AreaApoptosis
CloneD3R6Y

Add to Compare List

Cell Signaling Technology

3 Trask Lane

Danvers, Massachusetts 01923

United States

Phone: 877-616-CELL
Phone: 978-867-2388
Fax: 866-432-6112
Fax: 978-867-2488

Company Profile

Website: http://www.cellsignal.com/

Website: Technical Support

(1) Modulating biodiesel yield and purification with plant-derived hydrophobic iron oxide nanocatalystsNanoscale AdvancesFebruary 3, 2026Kaouthar AhmoudaFeNP-catalyzed biodiesel variants exhibited kinematic viscosity (νbio) and density (dbio) within the EN 14214 specification ranges of 1.98–3.12 cSt at 40 °C and 870–890 kg m−3 at 15 °C, respectively (Table 5),

(2) Deciphering the role of Enterobacter cloacae as a green whole-cell biocatalyst for production of Calophyllum inophyllum biodieselScientific ReportsNovember 20, 2025S. Vishnupriya, S. Rahul, P. Nithyanand, A. Arumugamincreases the cetane number and overall combustion efficiency. Properties of biodiesel ASTM D6751 and EN 14214 specifications are fulfilled by the biodiesel from the feedstock that is tested. The fuel density (873

(3) Correlation and Prediction of Waste Cooking Oil and Biodiesel ViscositiesACS OmegaJuly 8, 2025Saman Khalighi, Abel G. M. Ferreira, Jaime B. Santos, Pedro F. Cruz, Rui M. M. Britomass %, evaluated by 1H NMR) and the kinematic viscosity at 40 °C (5.0 cSt), in compliance with EN-14214 and ASTM-D675 standards. 2.2 Viscosity Measurement Dynamic viscosity measurements were performed at

(4) Cleaner Biofuel Production via Process Parametric Optimization of Nonedible Feedstock in a Membrane Reactor Using a Titania-Based Heterogeneous Nanocatalyst: An Aid to Sustainable Energy DevelopmentMembranes (Basel)November 27, 2023Maria Ameen, Muhammad Zafar, Mushtaq Ahmad, Mamoona Munir, Islem Abid, Abd El-Zaher M. A. Mustafa, Mohammad Athar, Trobjon Makhkamov, Oybek Mamarakhimov, Akramjon Yuldashev, et al.Parameter,ASTM,EN 14214,China GB/T20828-2007,Azadhiracta indicaBiodiesel "Density@15 °C, gm/cc",0.8445,-,-,0.897 Kinematic

(5) Advanced Biofuels from ABE (Acetone/Butanol/Ethanol) and Vegetable Oils (Castor or Sunflower Oil) for Using in Triple Blends with Diesel: Evaluation on a Diesel EngineMaterials (Basel)September 19, 2022Laura Aguado-Deblas, Francisco J. LÃ³pez-Tenllado, Diego Luna, Felipa M. Bautista, Antonio A. Romero, Rafael Estevezreduced the viscosity of SO by around 77% (from 37.8 to 8.6 cSt). The viscosity values required by UNE EN 14214 ISO 3104 were achieved with proportions of ABE/SO 50/50 (υ = 4.30 cSt) and ABE/CO 70/30 (υ = 3.42 cSt).

(6) Biodiesel Synthesis from High Free-Fatty-Acid Chicken Fat using a Scrap-Tire Derived Solid Acid Catalyst and KOHPolymers (Basel)February 8, 2022Ibrahim M. MaafaS. No.,Parameters,Unit,FAME,EN 14214 1,Flash Point,°C,152,100–170 2,Cloud Point,°C,0,- 3,Pour Point,°C,−2,−5–10 4,Kinematic Viscosity

(7) Triglyceride Conversion of Waste Frying Oil up to 98.46% Using Low Concentration K⁺/CaO Catalysts Derived from EggshellsACS OmegaDecember 28, 2021Mosharof Hossain, Nuzhat Muntaha, Lipiar Khan Mohammad Osman Goni, Mohammad Shah Jamal, Mohammad Abdul Gafur, Dipa Islam, Abu Naieum Muhammad Fakhruddinbiodiesel,WSO biodiesel,WSO biodiesel,WSO biodiesel,, parameter,units,4th,8th,12th,16th,test method,EN 14214:2012 viscosity @ 40 °C,cSt,4.52,4.58,4.55,4.59,ASTM D445-19a,3.50–5.00 acid value,mgKOH/g,0.22,0.23,0.28,0.28,ASTM

(8) Jatropha Curcas Biodiesel: A Lucrative Recipe for Pakistanâ€™s Energy SectorProcessesJune 29, 2021Haseeb Yaqoob, Yew Heng Teoh, Farooq Sher, Muhammad Umair Ashraf, Sana Amjad, Muhammad Ahmad Jamil, Muhammad Musaddiq Jamil, M. A. Mujtabavariants. Table 6. Characteristic comparison of diesel, Jatropha methyl esters, Jatropha oil, ASTM D 6751, and EN 14214 specifications [16,42,120]. Properties ◦C (kg/m3 ) Density at 15 Acid value (mg KOH/g) Sulfated ash

(9) Production and Characterization of Biodiesel from Avocado Peel Oils using Experimental Analysis (ANOVA)Journal of Engineering AdvancementsJune 28, 2021Tafere Aga Bullo, Feyissa Bekele Fanaimpurities passed through the esters and other impurities. Property Avocado peel oil Biodiesel Yields EN 14214 ASTM D-6751 PH 6.2 7.8 5- 6.7 7-9 Density at 15 0 C, kg/m3 910 880 86090 Specific gravity 0.91 0.88 0.860.9 Kinematic viscosity

(10) Extraction and Quality Evaluation of Biodiesel from Six Familiar Non-Edible Plants SeedsProcessesMay 11, 2021Inam Ullah Khan, Hang Chen, Zhenhua Yan, Jun Chencharacterizations of FAME obtained from six non-edible plant sources. LSBD AABD SPBD CABD TOBD TSBD EN 14214 ASTM D6751 45 38 51 48 54.4 35 - - 0.9323 0.873 0.929 0.924 0.8858 0.995 0.86–0.90 0.86–0.90 Kinematic

(11) Combustion and Emission Performance of CO/NOx/SOx for Green Diesel Blends in a Swirl BurnerACS OmegaJanuary 12, 2021Abdulkareem Ghassan Alsultan, Nurul Asikin Mijan, Nasar Mansir, Siti Zulaika Razali, Robiah Yunus, Yun Hin Taufiq-Yapno.,fuel properties,G5,G20,G100,ASTM D6751,EN 14214 1,flash point (Pensky–Martens closed cup),157.5,188.9,238.4,>130,>101 3,kinematic viscosity (40 °C)

(12) OPTIMUM PRODUCTION AND CHARACTERIZATION OF BIODIESEL FROM MICROCYSTIS AERUGINOSA ALGAEJournal of Engineering Studies and ResearchJanuary 8, 2021BABATOPE OLUFEMI, SALEEM SULAIMON, ADEWALE ARIKAWEproperties with petro-diesel, ASTM and EN standards [29]. Biodiesel ASTM D6751-20 from PetroFuel property EN 14214 [30] [31] M. diesel aeruginosa Higher heating value (MJ/kg) 63.7542 43.3-46.7 Kinematic viscosity at

(13) Valorization of Cynara Cardunculus L. Oil as the Basis of a Biorefinery for Biodiesel and Biolubricant ProductionEnergiesSeptember 29, 2020Sergio Nogales-Delgado, Nuria SÃ¡nchez, JosÃ© MarÃa Encinar[31]. Table 2. Main characteristics of biodiesel from Cynara Cardunculus L. and comparison with the UNE-EN 14214 standard. Characteristic Cardoon Biodiesel UNE-EN 14214 Fatty Acid Methyl Ester, % Density at 15

(14) OPTIMIZING REACTION CONDITIONS OF BIODIESEL PRODUCTION FROM WASTE COOKING OIL USING GREEN SOLID CATALYSTInternational Journal of Engineering Technologies and Management ResearchSeptember 5, 2020I Nengah Simpen, I Made Sutha Negara, Sofyan Dwi Jayantobase on the SNI-04-7182-2006 Property Produced biodiesel Biodiesel Standards Biodiesel standards of EN 14214 (SNI-04-7182-2006) o 3 Density at 40 C (kg/m ) 850 850-890 860-900 (at 15oC) o Viscosity at 40 C (cSt) 3.32 2.3-6.0 3.50-5.00 Iodine

(15) The Cultivation of Lipid-Rich Microalgae Biomass as Anaerobic Digestate Valorization Technologyâ€”A Pilot-Scale StudyProcessesApril 27, 2020Marcin DÄ™bowski, Marcin ZieliÅ„ski, Marta Kisielewska, Joanna Kazimierowicz, Magda Dudek, Izabela Åšwica, Aleksandra Rudnickafrom the microalgae biomass. Properties Unit Fatty Acid Methyl Esters (FAME) According to the PN-EN 14214 Norm Bio-Oil Min. Max. kg/m3 860 900 912 ± 35 cSt 3.50 5.00 33.2 ± 5.1 Flash point ◦C 120 - - Water

(16) Biodiesel and Hydrogen Production in a Combined Palm and Jatropha Biomass Biorefinery: Simulation, Techno-Economic, and Environmental EvaluationACS OmegaApril 7, 2020Antonio NiÃ±o-Villalobos, Jaime Puello-Yarce, Ãngel DarÃo GonzÃ¡lez-Delgado, K. A. Ojeda, Eduardo SÃ¡nchez-TuirÃ¡nproperty,biodiesel from palm oil,biodiesel from jatropha oil,JP30-PO70,EN 14214 ester content (% wt),97.74,98.83,96.53,min 96.5 density@15 °C (kg/m3),878.65,879.33,878.77,860–900 viscosity@40

(17) Diethyl Ether as an Oxygenated Additive for Fossil Diesel/Vegetable Oil Blends: Evaluation of Performance and Emission Quality of Triple Blends on a Diesel EngineEnergiesMarch 25, 2020Laura Aguado-Deblas, JesÃºs Hidalgo-Carrillo, Felipa M. Bautista, Diego Luna, Carlos Luna, Juan Calero, Alejandro Posadillo, Antonio A. Romero, Rafael Estevezis added when DEE is added to sunflower oil. For both oils, the viscosity values required by UNE EN 14214 to sunflower oil. For both oils, the viscosity values required by UNE EN 14214 ISO 3104, in the range ISO

(18) Galanthamine improves myocardial ischemia-reperfusion-induced cardiac dysfunction, endoplasmic reticulum stress-related apoptosis, and myocardial fibrosis by suppressing AMPK/Nrf2 pathway in ratsAnnals of Translational MedicineJanuary 14, 2020Xiaolin Hou, Minhuan Fu, Biao Cheng, Yu Kang, Dili Xiehydrated with gradient ethanol. Then, the slices were incubated with the primary antibody caspase 3 (#14214, 1:1000, CST, Beverly, MA, USA), treated with a universal secondary antibody (#7074, CST, Beverly, MA,

(19) Production of the low viscosity waste cooking oil ethyl esterPamukkale University Journal of Engineering SciencesJanuary 1, 2020Mert GÃ¼lÃ¼m, Atilla Bilgin, AbdÃ¼lvahap Ã‡AKMAK(cSt) ile en düşük viskoziteye sahip olduğu belirlenmiştir. Üretilen biyodizelin yakıt özelliklerinin EN 14214 standardına uygun olduğu tespit edilmiştir. Ayrıca, bu çalışmada elde edilen viskozite değerinin (3.595

(20) Characterization and Production of Environmentally Friendly Biodiesel from Patin FishProceedings of the International Seminar of Science and Applied Technology (ISSAT 2020)January 1, 2020Rana Aulia Yupitasary, Irvan Maulana, Devita Utami Mardiani, Herawati Budiastuti, Sri Widarti(mgKOH/g) SNI-7182-2015 850-890 2.3–6.0 Max 0.05 Max 0.5 Oxidation Stability (minutes) 480 Table 2 Biodiesel Quality Standards Based on EN 14214-2012 2.3 Transesterification Reaction The process of making biodiesel can be done through an esterification

Be the First to Write a Review!

Caspase-3 (D3R6Y) Rabbit mAb (IHC Formulated) from Cell Signaling Technology

Description

Cell Signaling Technology

Citations (48)

Reviews

Caspase-3 (D3R6Y) Rabbit mAb (IHC Formulated) from Cell Signaling Technology

About Biocompare

Advertise with Us

Specialized Search Tools

Site Map