Cell Culture Monitoring Systems / Cell Culture Monitoring Sensors

Get quotes for all products
Select All
Select up to 5 products from below to compare or request more information.
Request Info for all productsCompare
BioProfile® Chemistry Analyzer

BioProfile® Chemistry Analyzer

Nova Biomedical

  • Catalog Number:
  • Description: A key to successful cell culture or fermentation is the ability to monitor nutrient composition during the process, and make rapid adjustments in response to changes in the composition. Nova BioProfile Chemistry Analyzers provide immediate analysis of key nutrients, metabolites, and gases in cell culture and fermentation media. BioProfile analyzers are fully automated, multi-test systems designed for rapid, simultaneous analysis of up to 13 key measurements with results available in 3 minutes or less. Measured tests glucose, lactate, glutamine, glutamate, ammonium, pH, PO2, PCO2, sodium, potassium, acetate, phosphate, and glycerol. These analyzers provide the flexibility of direct sampling, batch processing from a 40-position sampling tray, or direct, unattended sampling from up to four bioreactors using Nova’s On-Line Autosampler. Optional feedback control allows automated introduction of nutrients when preset limits are reached.
Read More
Get QuoteSupplier Page
Compare or Get Quote for selected.
SENSOLUX® Shaker Tray with a Sensor System

SENSOLUX® Shaker Tray with a Sensor System

Sartorius Group

  • Catalog Number: DCS09
  • Description: Shaker tray with a sensor system (9 measurement points) for optical pH- and DO determination in shake flasks. Cables, data collector unit & the software SENSOLUX® control included
Get QuoteSupplier Page
Compare or Get Quote for selected.
BCP-CH4

BCP-CH4

BlueSens Gas Sensor GmbH

  • Catalog Number: BCP-CH4
  • Description: The robust BCP-CH4 IR-sensors are the ideal solution for the analysis of methane on the industrial scale.
    Biogas plants can be ideally monitored with this reliable sensor. By its standardized connections, it can be integrated in all standardized systems. In combined heat and power plants and biogas plants the current degree of efficiency can be analyzed at anytime and so the yield can be maximized. The resistant and compact housing of the BCP-CH4 series corresponds to protection class IP 65 and has already proven its worth under heavy duty. On demand the sensor can be equiped with an additional display, which continuously shows the real time measuring value. The investment costs can be amortized very quickly thanks to the attractive price and the low maintenance costs. The BCP-CH4 sensor is easy to install and measures directly on the spot where the process takes place. And all this is offered with a very low level of maintenance. BCP-CH4 simplifies measurement – the cooling of the gas, complicated lines, valves or pumps are not needed. Thanks to the standard interfaces the data can be readout in real time by any electronic process control system.
Read More
Inquire
Compare for selected.
BCP-CO2

BCP-CO2

BlueSens Gas Sensor GmbH

  • Catalog Number: BCP-CO2
  • Description: The BCP-CO2 is a reliable CO2-sensor for the laboratory and the industrial use. You can choose between a robust version with an aluminum housing or a compact version with a PA-plastics housing. Whatever you decide for – BCP-CO2 optimizes bioprocessing easily, efficiently and precisely. The field of application is large – whether in the bioreactor or in the fermenter, in the laboratory or on the industrial large scale. The sensor is favourably priced, long-term stable and already often used in parallel bioreactors. BCP-CO2 works independently of the gas flow quantity with the established dual wavelength infrared measurement technology. The maintenance is more than easy and the operation costs are very low. Due to its low weight of 0.77lb (350g), the compact sensor in a PA housing can be screwed sterile directly at the shake flask. Thanks to its universal connections, BCP-CO2 can be easily integrated in existing gas lines and can be connected to any process line system without difficulties due to the standardised data interfaces.
Read More
Inquire
Compare for selected.
BCP-H2

BCP-H2

BlueSens Gas Sensor GmbH

  • Catalog Number: BCP-H2
  • Description: The thermal conductivity hydrogen sensor BCP-H2 measures any concentration of hydrogen in the shake flask and fermenter. The BCP-H2 can be integrated directly into the gas line and operates independent from the gas flow. Application areas are the chemical industry, biogas plants, agriculture and the Bioprocessing. It can also be used to monitor algal hydrogen production. The reasonably priced BCP-H2 measures very stable and is highly reliable.
Read More
Inquire
Compare for selected.
BCP-O2

BCP-O2

BlueSens Gas Sensor GmbH

  • Catalog Number: BCP-O2
  • Description: BCP-O2 is a reliable and uncomplicate sensor for the measuring of the oxygen rate in real time. Processes in bioprocessing are optimized efficiently and precisely. The field of application is large – whether in the shake flask or in the fermenter, in the laboratory or on the industrial scale.
    BCP-O2 is favourably priced, longterm stable and is already often used in parallel bioreactors. Sampling, gas cooling and cumbersome lines and filters are superfluous. Thanks to the standard interfaces the data of this oxygen analyzer can be readout by any electronic process control system.
Read More
Inquire
Compare for selected.
BCpreFerm

BCpreFerm

BlueSens Gas Sensor GmbH

  • Catalog Number: BCpreFerm
  • Description: BCpreFerm - the whole gas analysis for the scale-up process. Running continuous measurements of the CO2 and O2 contents in shake flasks and fermenters facilitates controlled trial conditions with simultaneous analysis of the metabolic processes. Oxygen or substrate limitations can be detected along with metabolic transpositions. Furthermore, a time specific analysis of the desired product is made possible. For improved comparability, the measurement system BCpreFerm can be used for shake flasks and fermenters. The analysis system consists of up to 6 CO2 and 6 O2 sensors, a data multiplexer and the software FermVis for automatic data recording. The oxygen uptake rate (OUR), carbon dioxide emission rate (CER) and the respiratory quotient (RQ) are calculated by this software.
Read More
Inquire
Compare for selected.
BlueInOne Cell

BlueInOne Cell

BlueSens Gas Sensor GmbH

  • Catalog Number: BlueInOne Cell
  • Description: BlueInOne Cell: CO2/O2 gas analyzer for cell growth processes. The new analyzer for carbon dioxide and oxygen has been specially designed for monitoring cell growth processes in biotechnology. The device can be installed directly in the exhaust flow of the bioprocess and measures the concentration of CO2 and O2 there in real-time. The BlueInOne Cell automatically compensates any fluctuations of pressure and humidity in the system. The readings are therefore extremely accurate even under fluctuating measuring conditions. The BlueInOne Cell gas analyzer is fitted with an IR-CO2 sensor, as well as a new electrochemical oxygen sensor with a galvanic cell. This new O2-detector offers a measuring range of 0-100 % Vol. for oxygen, long-term stability and has a very high resolution of 50 ppm. The device can also analyze anaerobic processes with high precision.
Read More
Inquire
Compare for selected.
BlueInOne Ferm

BlueInOne Ferm

BlueSens Gas Sensor GmbH

  • Catalog Number: BlueInOne Ferm
  • Description: BlueInOne Ferm: Compact gas analyzer for fermentations. The device combines the parallel measurement of CO2 and O2. It can be used for fermenters of every size, from the lab to industrial scale. The BlueInOne Ferm also measures the pressure and humidity right in the off gas of the bioprocess. Therefore the BlueInOne Ferm is neither affected by the gas flow nor by humidity in the process. This state-of-the-art combined analyzer stands for highest precision and reliability.
Read More
Inquire
Compare for selected.
Yieldmaster

Yieldmaster

BlueSens Gas Sensor GmbH

  • Catalog Number: Yieldmaster
  • Description: The Yieldmaster is a biogas analysis system for the measurement of the CH4 gas formation potential. It is a complete system consisting of microprocessor controlled infrared-CH4 gas sensors, precision volumenometers and the related BACVis data acquisition software. Using this combination, you can obtain comparable measurements on the gas-formation potential of substrates in vessels of the smallest size (500 ml) right up to the largest laboratory fermentation reactors. The automatically recorded measurement data ensures continuous documentation.
    Gain information about:
    • process kinetics
    • substance behaviour
    • substrate characteristics
    • limitations
    • outputs
Read More
Inquire
Compare for selected.
Select All
Select up to 5 products from above to compare or request more information.
Request Info for all productsCompare

Tags:

Please Login or Register to Create Tags
Company Filter Help
Use this product listing in multiple ways:
  • Click Get Quote to receive a quote from the vendor for that product
  • Check up to 5 products and click to compare to view product specifications side by side or Get quote to get a quote for all your selected products
  • Click Get quotes for all products at the top of the list to get a quote for all products
Vendor Filter
  • BlueSens Gas Sensor GmbH
  • Nova Biomedical
  • Sartorius Group